Big Moving Sale! Korado, lots of Puch Stuff: e50

I'm moving in a few weeks and have a lot of extra stuff I would rather not have to move... Lots of stock Puch goodies, plus a korado that apparently does not have a korado engine, yet still has the Ducati CDI? Email me with any questions you have. I have an extremely clean stock engine with black clutch cover and flywheel cover that I may be willing to sell for the right price. It's case matched for an Athena kit, which I also have, but again, right price might get it... Everything else, email me an offer for it shipped.

Partial list of stuff I have:

Pedals and crank (sprocket is slightly bent but I bet it still works)

Rear shocks from a maxi (one small hole in plastic)

Biturbo pipe

Two stock exhausts, dirty and nasty, one with black heat guard thingy

Maxi sidecovers (kinda beat up, have bolts for it too)

Iron bore 50cc cylinder (decent shape) and head

High comp (70cc?) head that has been sanded a bit- the one from treats

50cc stock head

Mirrors from a newport

Cateye front blinkers and box, plus switch and some wire

45 tooth sprocket

Two points flywheel setups

Two flywheel covers (one missing plastic emblem, but very shiny)

Two high tension coils (kinda beat up?)

Both air boxes from a korado- may go with the korado?

Stock crank from a polini setup at 50+mph (must be strong?)

Slightly bent, but very clean front spoked wheel (crashed at WB3)

Forks and fender from said crash (

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

Oh yeah, here's the album with all the close ups and detail pics:

"Puch Stufff!":http://s484.photobucket.com/albums/rr201/blue27343/Puch%20stuff%204/

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

Sale(s?) pending bump?

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

paypaled ya!

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

still have

Pedals and crank (sprocket is slightly bent but I bet it still works)

Rear shocks from a maxi (one small hole in plastic)

Two stock exhausts, dirty and nasty, one with black heat guard thingy

Iron bore 50cc cylinder (decent shape) and head

High comp (70cc?) head that has been sanded a bit- the one from treats

50cc stock head

Mirrors from a newport

45 tooth sprocket

Two points flywheel setups

Two flywheel covers (one missing plastic emblem, but very shiny)

Two high tension coils (kinda beat up?)

Both air boxes from a korado- may go with the korado?

Stock crank from a polini setup at 50+mph (must be strong?)

Slightly bent, but very clean front spoked wheel (crashed at WB3)

Forks and fender from said crash (ber beat up, good for parts?)

Horn

Bro dude seat (belongs to a friend, but I think he wants to sell it)

Beat to hell clutch cover

Air filter for a 19mm PHBG

and the Korado

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

well none of us want the korado, why dont you post the info on the motor ( is it a 3 or 4 bearing, cdi or points) and saw the rest up like you originally intended to do?

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

Crossvalley Tonysieze /

Hey emailing ya for the points stator assembly stuff, fluweel cover with emblem and mirrors!

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

What are you looking to get for the Korado? If you're not in to shipping the whole thing, will you be selling the wheels and how much for those?

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

hi i was looking at your partial list of stuff u were trying to sell and i saw u have turn signals for a newport. i have a maxi. would i need an extra power source if i wanted to put them on to my ride?

-greg

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

I need a stock puch crank and a clutch cover...do you still have those?

Re: Big Moving Sale! Korado, lots of Puch Stuff: e

Hey, sorry I haven't replied to a couple of you... please email me with any questions because I don't get on here and check every day. so far I have sold the bi turbo, the turn signals, the side covers, the mirrors, one flywheel cover and a stator plate.

I have no clue on the korado engine other than it has a CDI... I'm in the middle of my finals, about to move, and haven't really had time to sit down and pull the clutch out or crack the case.

If anyone wants the Korado I would be willing to part with it for about $300. I paid more than that for it, plus drove 5 hours to pick it up, and it includes a brand new SHA 15.15 and intake that I added. I will be heading up to Maine from Georgia in a few weeks, so if you want it I can drop it off within a few miles of I-95 for free... If nothing else, it has nice controls, good clean mags and a decent e50 with CDI on it...

Give me an offer on some stuff, and if it will fit into a flat rate box and you pay postage, chances are I will give it to ya...

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account