HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Hey guys, just cleaning out a little bit. Make me an offer on anything, any offers considered. Mainly just Want to get some stuff sold, make a little money. Thanks!!

Vespa Stuff-variator clutches, Clutch puller, reflectors, etc.

Pedals/Crank Arms, also older tomos engine cover, NOS minarelli V1 engine cases (2).

Garelli Engine side covers (metal) Motobecane engine, turns over, has compression/spark. Can include coil. Has "bendy" intake-although it may have been welded on the bend.

Old garelli engine cases, one side is chipped (i beleive it is where the magneto is, idk if it would affect it or not. Has bearings and such in it. Garelli clutch rubber-good shape, starting chain, sprocket.

New aftermarket trac daelim engine, with reed valve case induction. Perfect condition. ALso, NOS batavus hug (shiny one on the left) and misc other hubs, leleu/etc.

More hubs, etc.

Monster decals. SWEET!!! Perfect for truck/car. Lol.

Pre-boxed garelli engine. Has 12 mm intake. Pipe, coil, etc all come with it. No carb. Has compression/spark.

Next page includes more items.

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

WHeels-one is a vespa ciao wheel, very good condition, with good tire.

Some kind of tool/extractor?

Cylinder heads, no gouges in any of them, just need cleaned up.

Gaskets/gasket sets.

Peugeot tools. ask me about what i have.

SOme kind of puller, ignition check-veryyy handy!!!!

Sachs puller, with accesories, new.

RARE RARE RARE!! Laura engine assembly tools. Clutch holder, puller, etc etc. For trac/batavus models with m48/m56 engines.

Gadabout parts, good headlight, decent seat, etc etc.

Bucket of moby parts. New kickstand for model 7 probably.

Coils, head gaskets, etc

Handlebars

Forks, etc. ALL NOS, besides one or two things.

Coils, electrical parts.

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Email sent.

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

🇮🇹💦 Of the Loin /

what peugeot tools do you have

and how much for the sachs puller

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

gaaadamn son!

How much for your nicest 6V HT coil? Preferably a brand new one would be nice.

And that moby engine.. how much total? Just the top end?.. do you know what type it is (fast/slow)?

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Emails replied to,

Steve-you want an inner coil (in the magneto) or the outer coil with a line to the spark plug.

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Jake, I want some stuff! Email sent.

Kev

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Email sent for Minarelli gaskets and assorted V1 parts and/or tools. Thanks.

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

do you have any foxi front forks?

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

would vespa cranks fit my kinetic. If so how much for a pair?

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

need minarelli v1 gaskets (seals too if ya got them) and a puch coil......thanks

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

how much for those sick nikes?

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

i want the sachs puller

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Theres several in line for the puller, but obviously. WHoever follows through gets it. Nikes, can be for sale lol. Uhmmm idk if vespa cranks will fit a kinetic. SHould, considering its basically the same. 15 for a set? And a puch coil will run 10 bucks.

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

🇮🇹💦 Of the Loin /

how much for the sachs puller? i asked pretty much right from the start.

also peugeot tools?

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

I think 35 for the puller is what ive been asking. Peugeot tools, i looked at, pretty much only useful thing is clutch puller-15 bucks.

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

I kinda want the puch pedal assembly that has a coder pin on the cog side. You know the one that's not solid. Dibz

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Just to point it out. How much do you want for it?

let's try this again

!img246.imageshack.us/my.php?image=pedalasebelyhe2.jpg!

It's that one...

Re: let's try this again

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

How much for the tall handlebars or those bars with the mirror on them in the box/pile and about how tall are they?

Thankx

Rick

Re: let's try this again

Eugene-how is 10 plus shipping.

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Hey, I would love to get my hands on that garelli motor, email me at MGsissonVT@gmail.com, We can work something out. One thing I need to know, on the left side right under/behind where the pedal crank comes out there should be an ID number... Something like 204074, 205001, 206034, let me know if you can get that and still have the part for sale.. thanks,. Matt

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

how do you want to get paid?

Re: let's try this again

You got it, where you want your money sent, and what's shipping?

Re: let's try this again

"Vespa Stuff-variator clutches"

got one with 100mm pulley plates?

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Any of the coils for an A3 (1989)?

Depends on price, but might take 2 if they are tested good.

Also, shipping to 19440?

Thanks, Scott

Re: HUGEEE MOPED PARTS SALE!! LOOK, pics!!

Hi I would love to buy the moby engine, where are you? would you ship and how much... thank you so much

monster decals...

still got em?

Re: monster decals...

Marc-yea i will ship the moby engine, how is 35 plus shipping for it?

Tiki-yep still got em.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account