77 Puch Maxi Project F/S

Wolf /
This single post is part of a larger thread. Start from the top or view this post in context.

This is a 77 puch maxi that only need a little work to be dont to have it ready to ride. i did all the work to it but i just got a new job and school will be starting so i dont have time or money to finish it. ok so about the moped. when i got it, it was spray painted black and not running. so i stripped it down to the frame and sanded that down to the metal and the re-painted it the stock red it once was. now i rebuilt it with almost all new parts!!! it needs a decomp cable and new fork springs and it will be ready to ride. the parts that are installed are as followed,

70cc reedvavle kit by athena(never started, brand new)

New 17mm amal carb

New High flow air filter

Slighty used Biturbo

New Cev Switches(one needs to be put on yet)

New Points and condenser

New Sava racing tires

New Brake and decomp assy

New Throttle and choke cable

New Puch Maxi "s" take decals

fresh red paint

New Petcock and fuel line

Freshly cleaned take(now full with gas)

Redid all of the wiring to correct what was messed up

comes with Stock Puch seat

Has title

This Moped has been almost fully restored and just needs to be finished. asking 800 OBO. parts were 700 dollars plus moped and labor = $800

thanks for looking!

`landon

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account