I'm unfamiliar with what you are talking about ( see, I told you carb settings were new to me :-) so I would have to say no.
The only settings I have touched are the set back screw where the cable comes
into the carb (to make sure it was not too loose or too tight), and the idle and mixture screws. I've set the idle down to where the bike is running nice and quiet, even with the BiTurbo. Next I turned the mixture screw one way till it started idling worse, then I turned it back the other way till it started idling worse. Then I twisted it back to the middle position where it was running the best, and re-adjusted the idle to get it back to quiet.