Re: Just got a QT50 Won't start

Justin /
This single post is part of a larger thread. Start from the top or view this post in context.

More troubleshooting;

I am pretty sure it's getting gas... not sure it's getting enough. I pulled the line off the carb and it kinda drips out if the babcock is in "ON" should it be "streaming" out of the tank?

Also, when in the start position, the start light does not illuminate, only when I push the pedal, and only sometimes not all the time.

I am positive i'm getting spark, tested.

I used soem "quik start" ether in the carb, and it starts for about 10 seconds, revs up, then sputters and dies....

I dont have ALOT of time to troubleshoot this, is there a place in Toronto I can take it to be looked at?

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  Just got a QT50 Won't startTopic by: Justin Justin 09/13/02 07:12PM
  Re: Just got a QT50 Won't startRe: Justin Justin 09/13/02 09:14PM
  Re: Just got a QT50 Won't startRe: Justin Justin 09/14/02 01:06AM
  Re: Just got a QT50 Won't startRe: Andy Andy 09/14/02 02:37AM
  Re: Just got a QT50 Won't startRe: Justin Justin 09/14/02 08:09AM
  QT50 Won't startRe: Fred Fred 09/14/02 09:16AM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account