i need help new to mopeds

stonnerdog /
This single post is part of a larger thread. Start from the top or view this post in context.

i need help im new to mopeds and dont have very much mechanical experance. i have a puch moped and i have cleaned the carb got new spark plug and made sure coil and the spark plug wire were working and no lose connections. it started and ran fine for about 15 or so minutes then it just died and now i cant get it to restart i dont know if i fouled the plug all ready or what < the plug is a ngk model # b6hs> is this the wrong kind/size?? the plug is a excat replacement to what came w/ the bike when i got it. i would really appriceate any advice on the subject thankx.

stonnerdog

swarm and destroy

p.s. could any one plese tell me the directions to check and clean the points.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  i need help new to mopedsTopic by: stonnerdog stonnerdog 12/28/00 10:10PM
  Basic Tune-UpRe: Fred Fred 12/29/00 01:39AM
  Re: Basic Tune-UpRe: mike mike 12/29/00 05:00PM
  Re: Basic Tune-UpRe: Jim C Jim C 01/01/01 10:32PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account