1980 Morini M1 pacer help

Pete Flaven /
This single post is part of a larger thread. Start from the top or view this post in context.

I just installed a new 42mm too end kit on my pacer super sport...

I bought the ped seized a few months ago and the plan was to keep it simple.

I got the old piston out of the cylinder but the walls of the cylinder were too far gone to just put a stock size piston in.

So I got the 42mm kit and now I need some help.

What carb or jetting is a good starting point and suggestions on a pipe?

2BB11A42-9269-4EA4-9635-AAA9819AEE39.jpeg
D1BD7587-0293-41F5-8BBD-0B2B8D88377D.jpeg
This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account