I’ve been searching for a carb for a Jawa I am trying to restore.
Would love to buy one on eBay if possible...
Dont really want to buy overseas as wait if possible....
Anyone got a link to one on there?
Also anyone know measurements that would work? Not finding a lot of info. I’m new at this... (edited)
https://www.mopedarmy.com/wiki/Category:Jawa
If you can fit a carb in there it will work with the right jetting.
Stock was a jerkov or something e post a pic of it
8mm intake I have a ton o carbs encarwi and dellorto.
You have carbs you are selling?
We can get photos to you soon.
use an Del Orto SHA
i think intakes are available at Treats
X
I have some intakes but know next to nothing about jawas
Ha the old Jikov Carb, p o s, I got a new Dellorto 1515 sha Carb ( ~60$) on treatland for my 1989 Jawa 50 cc 210 ( 2 speed), works great like they said it would , and did not even change the jets altho I tried a smaller jet but went to original. Works great, it's Italian and works on 100 cc also; I will look up the jawa 40 , did not know it.
The new carb is the black bubble at top of pic- was showing off my roach clip spark plug connection
Pm
This is great. I’m checking it out.
I have a mechanic friend that is helping me too.
This is one I thought it needed.
Here is info from my mechanic...
Would this setup work for one you mentioned on Treatlamd?
(See Picts)
The carb shown is one jawaparts said would be best... trying to order in USA though...
Thanks
I would go with the 14.14 not the 14.12. It will perform a bit better with your stock cylinder. But definitely go Dellorto not Jicov.
Actually, looking at your intake which is 12mm, unless you got a larger one, it wouldn't matter so 14.12 is fine. You can get them used here on Buy/sell chap as dirt because it was the stock carb on hundreds of makes, and most people here soup theirs up and toss the 14.12 into a forgotten box on the shelf. You can probably score a decent one for under $20. Then just buy the intake adapter and done.
Dave does it crossover to a Tomos or bat or anything.
Want to post in this forum? We'd love to have you join the discussion, but first: