Cimatti no start

Michael Shogren /
This single post is part of a larger thread. Start from the top or view this post in context.

So my City Bike won’t turn over. I rebuilt the carb, changed out the forks and handlebars so I printed out the schematic and rewired what I had too. Looking over the bike I noticed that when I engage the clutch, the magneto won’t spin or barely does. But when I turn it by hand I can hear the carb working, compression out of the exhaust and the piston does move. So I’m guessing my clutch is slipping or not engaging at all. If I take the crank case off, what should I look for within the clutch set up? The bike did run before I made the changes. (edited)

9B0F63EC-E0EC-4E11-B08A-4489F8F3068E.jpeg
This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account