I'm trying to make up some designs for a 3D printed tuning kit, and i was hoping to get measurements for main jets/idle jets/jet needles for each carburetor type.
So if you can get me caliper measurements (at least to the first decimal, like X.Xmm) of all three categories, I'll make you and a friend a free case. You pay shipping tho.
I need the numbers from following brands:
Polini CP
Dellorto PHBG
Dellorto PHVA
Mikuni VM / TM
https://www.jetsrus.com/FAQs/FAQ_identify_that_jet.htm
Every jet dimension you could want
> Dirty30 Dillon Wrote:
> -------------------------------------------------------
> https://www.jetsrus.com/FAQs/FAQ_identify_that_jet.htm
>
> Every jet dimension you could want
With the exception of Bing, Otherwise it’s pretty good site, good find Dylan thanks,
> Overpriced Parts Wrote:
> -------------------------------------------------------
> > Dirty30 Dillon Wrote:
>
> > -------------------------------------------------------
>
> > https://www.jetsrus.com/FAQs/FAQ_identify_that_jet.htm
>
> >
>
> > Every jet dimension you could want
>
> With the exception of Bing, Otherwise it’s pretty good site, good find
> Dylan thanks,
Forgot Bing, i need those numbers too!
Bing is the sound the jet makes when it hits the floor, dropped because it is the most inconveniently sized jet ever made.
i think myrons has a binh/dellorto crossover chart.
Want to post in this forum? We'd love to have you join the discussion, but first: