Re: 70cc Puch Maxi top end?

Kyle Washburn /
This single post is part of a larger thread. Start from the top or view this post in context.

Wanted to update: still waiting on the 17 tooth, but I was itching to ride so I took the ped out for it's first "real" ride since my full rebuild. I had planned to do a short one, but ended up doing an hour long ride through Boston for a total of 15 miles. Temps maxed at 343* during a long uphill stretch. Let me just say ... Wow!!! I started pedaling 2-3 strokes from takeoff and my low end is unbelievable. Even from a stop without peddling, it's much better than before. Still tops out at 36, but the Powerband hits wayyyyy harder and the thing really rips. This is with a 75 jet in and the needle on the richest setting. I left the jammer clutch on and I really like it now - not sure if I got used to it/learned how it engages/likes to run, or if it broke in a little bit more but it's awesome.

Overall, I don't think it could be running any better. Starts first kick when it's cold (25*F), and starts first kick after it's been ridden for an hour straight and is hot. Idle is perfect, takeoff is awesome, and low-mid range power is perfect. I honestly never needed to go faster than 36. Really happy with it. All it took was that needle clip move to the richest setting! (And lots of suggestions from you all)

Interested to see how it performs at 17x45. The kit was rattling very loudly at different times throughout my ride which made me nervous that the Piston was slapping, but after some research it seems like the treats kit is known to rattle.

I was smiling the whole hour while bundled in my winter coat and scarf, just enjoying the freshly built motor while people looked at me like wtf. Really happy I have a temp gauge so I can confidently ride at WOT and know it's still cool as well.

I'll report back when I put the 17 tooth on. Thank you all for the help, pumped I'm finally satisfied! Riding this bad boy to work tomorrow

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  70cc Puch Maxi top end?Topic by: Kyle Washburn Kyle Washburn 12/31/19 01:50PM
  Re: 70cc Puch Maxi top end?Re: Probably Fred Probably Fred 12/31/19 03:46PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/01/20 06:26PM
  Re: 70cc Puch Maxi top end?Re: Probably Fred Probably Fred 01/01/20 06:54PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/02/20 07:23AM
  Re: 70cc Puch Maxi top end?Re: Seth B Seth B 01/02/20 02:14PM
  Re: 70cc Puch Maxi top end?Re: Dirty30 Dillon Dirty30 Dillon 01/02/20 02:26PM
  Re: 70cc Puch Maxi top end?Re: Dirty30 Dillon Dirty30 Dillon 12/31/19 08:55PM
  Re: 70cc Puch Maxi top end?Re: Jeff Parr Jeff Parr 12/31/19 10:05PM
  Re: 70cc Puch Maxi top end?Re: Jeff Parr Jeff Parr 12/31/19 11:22PM
  Re: 70cc Puch Maxi top end?Re: Tri-ped Dave O.D.B. Tri-ped Dave O.D.B. 01/01/20 06:57PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/02/20 07:23AM
  Re: 70cc Puch Maxi top end?Re: The Dude The Dude 01/02/20 02:28PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/02/20 03:05PM
  Re: 70cc Puch Maxi top end?Re: Seth B Seth B 01/02/20 03:21PM
  Re: 70cc Puch Maxi top end?Re: EH 📣FCC of the QCB EH 📣FCC of the QCB 01/02/20 03:19PM
  Re: 70cc Puch Maxi top end?Re: Seth B Seth B 01/02/20 03:28PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/02/20 03:33PM
  Re: 70cc Puch Maxi top end?Re: EH 📣FCC of the QCB EH 📣FCC of the QCB 01/02/20 04:02PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/02/20 04:11PM
  Re: 70cc Puch Maxi top end?Re: Probably Fred Probably Fred 01/02/20 05:30PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/02/20 05:51PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/03/20 09:35PM
  Re: 70cc Puch Maxi top end?Re: P D P D 01/04/20 09:03AM
  Re: 70cc Puch Maxi top end?Re: Seth B Seth B 01/04/20 01:48PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/04/20 10:09AM
  Re: 70cc Puch Maxi top end?Re: P D P D 01/04/20 10:33AM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/05/20 02:17PM
  Re: 70cc Puch Maxi top end?Re: Seth B Seth B 01/05/20 03:16PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/05/20 07:15PM
  Re: 70cc Puch Maxi top end?Re: EH 📣FCC of the QCB EH 📣FCC of the QCB 01/05/20 08:31PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/05/20 10:01PM
  Re: 70cc Puch Maxi top end?Re: EH 📣FCC of the QCB EH 📣FCC of the QCB 01/06/20 07:12AM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/06/20 11:49AM
  Re: 70cc Puch Maxi top end?Re: P D P D 01/06/20 11:53AM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/06/20 12:03PM
  Re: 70cc Puch Maxi top end?Re: P D P D 01/06/20 12:41PM
  Re: 70cc Puch Maxi top end?Re: EH 📣FCC of the QCB EH 📣FCC of the QCB 01/06/20 12:54PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/06/20 01:05PM
  Re: 70cc Puch Maxi top end?Re: EH 📣FCC of the QCB EH 📣FCC of the QCB 01/06/20 06:35PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/06/20 01:00PM
  Re: 70cc Puch Maxi top end?Re: Tri-ped Dave O.D.B. Tri-ped Dave O.D.B. 01/06/20 07:46AM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/06/20 12:00PM
  Re: 70cc Puch Maxi top end?Re: Dusty Rim Dusty Rim 01/06/20 06:45PM
  Re: 70cc Puch Maxi top end?Re: EH 📣FCC of the QCB EH 📣FCC of the QCB 01/06/20 06:48PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/06/20 10:35PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/07/20 11:21PM
  Re: 70cc Puch Maxi top end?Re: EH 📣FCC of the QCB EH 📣FCC of the QCB 01/07/20 11:26PM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/07/20 11:36PM
  Re: 70cc Puch Maxi top end?Re: Seth B Seth B 01/08/20 01:09AM
  Re: 70cc Puch Maxi top end?Re: Kenneth Hill Kenneth Hill 01/08/20 07:18AM
  Re: 70cc Puch Maxi top end?Re: Kyle Washburn Kyle Washburn 01/08/20 11:47AM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account