Re: NU50M Full Wave Rectifer update of a dated thread

> Graham Motzing Wrote:

> -------------------------------------------------------

> el pollo has never owned or worked on a moped and we're not sure why he

> keeps posting

Re: NU50M Full Wave Rectifer update of a dated thread

Beach Club Nick /

> el pollo Wrote:

> -------------------------------------------------------

> is there a biker alive that did not start on a moped?

>

Literally every one of the 30 or so people I know that ride motorcycles did not start on mopeds

Re: NU50M Full Wave Rectifer update of a dated thread

el pollo /
1369 OP

Dillon is a troll asshole. you really are screwing the ma with your stupid trolling. don't listen to Dillon. learn to order generic parts and do your whole lighting system for less than 20$.

deflection with lies and bullshit but never questions answered. you would actually need to read my posts to do this. anyone who has got this far knows you cant float a stator and the dude could just connect the yellow to the existing r/r on the bike and skipped all the mods. with led's this is now possible.

go back and read, every comment Dillon made on this thread is ether outright bullshit or just plain wrong.

Re: NU50M Full Wave Rectifer update of a dated thread

Dirty30 Dillon /

> el pollo Wrote:

> -------------------------------------------------------

> El Pollo is a troll asshole. you really are screwing the ma with your

> stupid trolling. don't listen to El Pollo. learn to order the correct parts

> and do your whole lighting system for less than $20.

>

> deflection with lies and bullshit but never questions answered. you

> would actually need to read my posts to do this. anyone who has got this

> far knows you cant float a stator and the dude could just connect the

> yellow to the existing r/r on the bike and skipped all the mods. with

> led's this is now possible.

>

> go back and read, every comment El Pollo made on this thread is ether

> outright bullshit or just plain wrong.

Re: NU50M Full Wave Rectifer update of a dated thread

el pollo /
1369 OP

typical Dillon. all his posts are just like this.

he is the one who does not want people to know what I post. he should be obvious he is a troll.

high power led's Dillon. what a jerk. learn to spec and use generic parts!

Re: NU50M Full Wave Rectifer update of a dated thread

Dirty30 Dillon /

> el pollo Wrote:

> -------------------------------------------------------

> typical Dillon. all his posts are just like this.

>

> he is the one who does not want people to know what I post. he should be

> obvious he is a troll.

>

> high power led's Dillon. what a jerk. learn to spec and use generic

> parts!

You really got me laughing with "Learn to Spec."

El Pollo's Spec: "Use the cheap COB's from eBay, they're so cheap and work the bestest."

I know I have said it, but I work full time repairing production, cinema, and event lighting, as a factory certified technician. I repair the fixtures for MSG, ESB, all of the 3-letter networks, etc. You can claim troll till the cows come home, it doesn't make your suggestions about using cheap LED's, or poorly read explanations of moped wiring schematics (for bike's you've never worked on) any more valid.

The only one diluting your opinions and ideas is you.

Re: NU50M Full Wave Rectifer update of a dated thread

todd amundson /

I haven't learned a god damn thing from this thread

Re: NU50M Full Wave Rectifer update of a dated thread

Dirty30 Dillon /

> todd amundson Wrote:

> -------------------------------------------------------

> I haven't learned a god damn thing from this thread

And there is the truth

Re: NU50M Full Wave Rectifer update of a dated thread

Apart from learning that guys a nut job!

Re: NU50M Full Wave Rectifer update of a dated thread

I have a ideal

Why don’t each of you layout a diagram of a complete circuit with all components with values of each part then let everyone here pick the one they like most. Maybe that will stop the pissing match between the members here. Do a puch and a honda nu50 or nc50.

Re: NU50M Full Wave Rectifer update of a dated thread

Dirty30 Dillon /

That's the exact point of this discussion: it's all been done already.

I am not going to offer any revelation to this via a schematic. People have been converting mopeds, motos, and all manner of motorized shit to run LED's for over a decade now.

It's good general knowledge that is being misapplied and misinterpreted.

Re: NU50M Full Wave Rectifer update of a dated thread

el pollo /
1369 OP

read and you can do yourself read what's written learn why.

the cob led's I use are less than 1w and are bright as hell.

they don't want this info out so they gaslight. Dillon wants to sell you the total catseye. what a bunch of assholes who think they know everything.

Re: NU50M Full Wave Rectifer update of a dated thread

Dirty30 Dillon /

> el pollo Wrote:

> -------------------------------------------------------

> read and you can do yourself read what's written learn why.

At least we agree on that.

> they don't want this info out so they gaslight. Dillon wants to sell you

> the total catseye. what a bunch of assholes who think they know

> everything.

I have never used a CatEye TurnSignal, nor do I sell anything to anyone to promulgate my own business. I offer more hours of help and time to the local moped community than I do make dollars from it.

Interesting that the person fighting to prove he knows everything, is calling the rest of us assholes.

Re: NU50M Full Wave Rectifer update of a dated thread

So in other words nether of the two of want to stop missing at each other. Nether offers help other read this or read that.

Re: NU50M Full Wave Rectifer update of a dated thread

Dirty30 Dillon /

> Jeff Parr Wrote:

> -------------------------------------------------------

> So in other words nether of the two of want to stop missing at each

> other. Nether offers help other read this or read that.

Both he and I have referenced and expounded upon the techniques with which to complete any of this work: some good, some bad.

Your criticism is noted.

Re: NU50M Full Wave Rectifer update of a dated thread

Ok so it's pre wedding jitters, when do the two of you tie the knot?

Re: NU50M Full Wave Rectifer update of a dated thread

Dirty30 Dillon /

> Jeff Parr Wrote:

> -------------------------------------------------------

> Ok so it's pre wedding jitters, when do the two of you tie the knot?

After you sign the court papers and give me away.

Re: NU50M Full Wave Rectifer update of a dated thread

> Dirty30 Dillon Wrote:

> -------------------------------------------------------

> > Jeff Parr Wrote:

>

> > -------------------------------------------------------

>

> > Ok so it's pre wedding jitters, when do the two of you tie the knot?

>

> After you sign the court papers and give me away.

Ill be there , what color is the setting? That was a good one.

Re: NU50M Full Wave Rectifer update of a dated thread

What kind of rectifier?

Re: NU50M Full Wave Rectifer update of a dated thread

Did we figure out who has the bigger Johnson yet or what?

El pollo loco homie.

Re: NU50M Full Wave Rectifer update of a dated thread

el pollo /
1369 OP

> Thomas TPRF Wrote:

> -------------------------------------------------------

> What kind of rectifier?

the difference between half wave and full wave is how its hooked up and where ground points are. all these parts use the same full wave bridge inside the r/r. its wired differently internally.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account