Nothing special, I just wanted to post something positive.
I split the case and installed new bearings, honed a stock Alu series cylinder and installed it with new rings.
1.5 pipe and intake, no snorkel.
I tried a 14mm Bing but didn't like it so now I'm running a 12mm with a 2.22/65 main/ needle clip at the top.
After lots of experimenting this setup seems to be the best so far.
The weather was 78F and I rode to the store to pick up some energy drinks.
I've done so much work on the bike and this was the first time I took it out to actually do something.
Just thought I'd share.