Remote choke malossi 21 phbg wtf

15619154097083794614673508878045.jpg

to

1561915091734712056945805882662.jpg

Second time installing one of these. Always have failed. Can't get the spacing on the cable correct for the lever to look right and function. On the first I eventually went to the stand alone choke that u have to locate under the covers. Anyway probably end up with that again but who knows how to do this right. The curved elbow in the package seems to leave too little cable for mounting the lever for the bars.

The picture with the unassembled parts is what seems to be for the choke lever. The other picture is how I had it last time I tried with the lever. The cable is a bit too long or a bit too short depending on how u asemble it. Anyway anyone ever do this right and ya remember how ??

Re: Remote choke malossi 21 phbg wtf

Bendy goes to the choke, not the throttle. Cable chokes kind of suck on those anyway, they break pretty often

Re: Remote choke malossi 21 phbg wtf

15619258549394770700706532242929.jpg
15619258077986884519560649371960.jpg
15619255274583802020930299165923.jpg

Cut 25 mm off bendy and gave up a nice way to perch the cable but this actually works. And whether or not the bendy is for this or the carb seeing it's a specialty route for the guillotine with a toilet bowl topper ( this is for an online mount not a spigot deal. I'm pretty sure this will be durable. And I can tweak it either by slicing off a bit more of the bendy.

Re: Remote choke malossi 21 phbg wtf

Inline mount. Thanks spell correction.

Re: Remote choke malossi 21 phbg wtf

Nice, personally I would throw some duct tape around the cable sheath/end of the bendy for good measure but it looks pretty tight so that might not be totally necessary

Re: Remote choke malossi 21 phbg wtf

Yes or some kind of two ended grommet with a hole to stabilize both .

Re: Remote choke malossi 21 phbg wtf

> Nick Haber Wrote:

> -------------------------------------------------------

> Nice, personally I would throw some duct tape around the cable

> sheath/end of the bendy for good measure but it looks pretty tight so

> that might not be totally necessary

Heat shrink tubing or self fusing tape . ;)

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account