Re: PA50 Crankshaft in NU50 Case

Doug Wilhelm /
This single post is part of a larger thread. Start from the top or view this post in context.

Bump, I will buy as many sets needed for you to produce a few sets of these adapters!

After getting my "no expenses spared" NX50 build running, I have determined that my stock-crank-with-forged-conrod and 70cc piston is quite out of balance, causing the fuel to foam in my Mikuni VM20, which causes fuel starvation, which doesn't allow me to ride at higher speeds, etc.

Long story short, I could either pay to get my crank balanced somewhere (yay -_-) or donate to the cause here to put out a few sets of something that would help the community. I'm on board with the latter! :D

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  PA50 Crankshaft in NU50 CaseTopic by: alex ganz alex ganz 10/05/17 01:58PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 10/05/17 02:02PM
  Re: PA50 Crankshaft in NU50 CaseRe: Hepatitis J [OFMC] Hepatitis J [OFMC] 10/05/17 05:04PM
  Re: PA50 Crankshaft in NU50 CaseRe: Captain Janeway Captain Janeway 10/05/17 05:19PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 10/05/17 06:09PM
  Re: PA50 Crankshaft in NU50 CaseRe: Hepatitis J [OFMC] Hepatitis J [OFMC] 10/05/17 06:27PM
  Re: PA50 Crankshaft in NU50 CaseRe: scrot rash scrot rash 10/05/17 08:49PM
  Re: PA50 Crankshaft in NU50 CaseRe: scrot rash scrot rash 10/05/17 09:00PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 10/05/17 10:54PM
  Re: PA50 Crankshaft in NU50 CaseRe: Doug Wilhelm Doug Wilhelm 11/22/17 10:48AM
  Re: PA50 Crankshaft in NU50 CaseRe: Ryan Graeme Ryan Graeme 11/25/17 04:58PM
  Re: PA50 Crankshaft in NU50 CaseRe: Doug Wilhelm Doug Wilhelm 11/22/17 11:37AM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 11/25/17 02:46PM
  Re: PA50 Crankshaft in NU50 CaseRe: Doug Wilhelm Doug Wilhelm 11/25/17 02:48PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 11/25/17 03:06PM
  Re: PA50 Crankshaft in NU50 CaseRe: bob john bob john 11/30/17 05:00AM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 11/25/17 03:09PM
  Re: PA50 Crankshaft in NU50 CaseRe: bob john bob john 11/30/17 05:08AM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 11/30/17 12:51PM
  Re: PA50 Crankshaft in NU50 CaseRe: bob john bob john 12/05/17 01:31AM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 12/05/17 12:04PM
  Re: PA50 Crankshaft in NU50 CaseRe: bob john bob john 12/06/17 04:15AM
  Re: PA50 Crankshaft in NU50 CaseRe: bob john bob john 12/26/17 11:19PM
  Re: PA50 Crankshaft in NU50 CaseRe: Doug Wilhelm Doug Wilhelm 12/06/17 02:39PM
  Re: PA50 Crankshaft in NU50 CaseRe: Mark Snapp Mark Snapp 12/30/17 04:17PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 01/02/18 01:41PM
  Re: PA50 Crankshaft in NU50 CaseRe: Doug Wilhelm Doug Wilhelm 01/02/18 07:01PM
  Re: PA50 Crankshaft in NU50 CaseRe: bob john bob john 01/03/18 08:06AM
  Re: PA50 Crankshaft in NU50 CaseRe: Rick Ems Rick Ems 01/01/18 06:46PM
  Re: PA50 Crankshaft in NU50 CaseRe: Ryan N. Ryan N. 01/02/18 07:37PM
  Re: PA50 Crankshaft in NU50 CaseRe: steven kline steven kline 01/05/18 03:48PM
  Re: PA50 Crankshaft in NU50 CaseRe: Doug Wilhelm Doug Wilhelm 01/27/18 11:00PM
  Re: PA50 Crankshaft in NU50 CaseRe: ~ Classic Don Trumpter ~ Classic Don Trumpter 01/28/18 01:00PM
  Re: PA50 Crankshaft in NU50 CaseRe: Derek Cox Derek Cox 03/12/18 09:31PM
  Re: PA50 Crankshaft in NU50 CaseRe: Derek Cox Derek Cox 03/13/18 06:01PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 03/13/18 06:57PM
  Re: PA50 Crankshaft in NU50 CaseRe: Doug Wilhelm Doug Wilhelm 03/13/18 06:09PM
  Re: PA50 Crankshaft in NU50 CaseRe: Derek Cox Derek Cox 03/13/18 06:14PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 03/13/18 07:13PM
  Re: PA50 Crankshaft in NU50 CaseRe: Jack Rutherford Jack Rutherford 03/13/18 07:32PM
  Re: PA50 Crankshaft in NU50 CaseRe: Derek Cox Derek Cox 03/13/18 07:52PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 03/13/18 11:29PM
  Re: PA50 Crankshaft in NU50 CaseRe: Doug Wilhelm Doug Wilhelm 03/13/18 11:56PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 03/14/18 12:22AM
  Re: PA50 Crankshaft in NU50 CaseRe: Charles Cole (OFMC) Charles Cole (OFMC) 03/17/18 06:39PM
  Re: PA50 Crankshaft in NU50 CaseRe: alex ganz alex ganz 03/19/18 08:29PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account