If you've got spark at the plug, it shouldn't be the condenser... you say you put dielectric grease on the spark plug 'tip'... you mean where the plug lead and cap go on right?.... You say you cleaned the carb real good, does that mean you removed the float bowl and removed the pilot jet and the main jet (both brass) and held them up to the light to see if they are clear?... if not you have to do that... To see if a clogged carburetor jet is the problem, get the moped ready to start and squirt some gas directly into the carb and try to start it and ride... if it starts and goes about 50 feet and dies, then you have a clogged carb jet.... clean them.... let us know what works.
RE: moped starting problems..
Want to post in this forum? We'd love to have you join the discussion, but first: