Re: milling cylinders?

Reeperette /
This single post is part of a larger thread. Start from the top or view this post in context.

I'd advise against it, actually for the old GBs...you don't have a gasket (or shouldn't, but I've seen fools stick em in there) and eventually the seal wears down anyhow....now if ya don't exactly mind replacing the cylinder top much sooner, go .10 to .20 but no more than that.

For the resta ya's for reference, the cylinder top on a Tomos is aluminum, and it doesn't use a cylinder gasket, just so's ya know.

-R

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  milling cylinders?Topic by: chuck russo (VA) chuck russo (VA) 01/04/02 01:17AM
  Re: milling cylinders?Re: RogNC RogNC 01/04/02 01:24AM
  Re: milling cylinders?Re: Brian Brian 01/04/02 10:51AM
  mill the head to increase compressionRe: Fred Fred 01/04/02 01:39PM
  Re: milling cylinders?Re: Reeperette Reeperette 01/04/02 02:13PM
  Re: milling cylinders?Re: Shmiver Shmiver 01/04/02 02:19PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account