Re: Porting an engine

Don /
This single post is part of a larger thread. Start from the top or view this post in context.

I had my head off of my honda elite 250 and also got a new dremel tool. I cleaned up the ports on it too. Inside of the ports was very rough. A seam even existed in there. It was like a speedbump for the gas and air mixture I bet. I ground all that down and made it as ssmooth and shiny as possible. I didn't want to get carried away so I left it at that. I'm hoping the smoothness makes a difference in how it runs and performs.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  PORTED MY CYLINDERTopic by: chuck russo va chuck russo va 12/26/01 08:41PM
  Re: PORTED MY CYLINDERRe: Wayne Wayne 12/26/01 08:54PM
  Re: PORTED MY CYLINDERRe: RogNC RogNC 12/27/01 12:20AM
  Re: PORTED MY CYLINDERRe: casey casey 12/27/01 12:21AM
  Re: PORTED MY CYLINDERRe: XBrandon EdgeX XBrandon EdgeX 12/27/01 01:52AM
  Re: PORTED MY CYLINDERRe: Crisis--Cincinnati Crisis--Cincinnati 12/27/01 10:09AM
  Re: PORTED MY CYLINDERRe: chuck russo (VA) chuck russo (VA) 12/27/01 10:13AM
  Re: PORTED MY CYLINDERRe: Jeff Jeff 12/27/01 10:23AM
  Re: PORTED MY CYLINDERRe: Crisis Crisis 12/27/01 10:25AM
  Re: PORTED MY CYLINDERRe: Wayne Wayne 12/27/01 10:51AM
  Porting an engineRe: mbartell mbartell 12/27/01 11:18AM
  Re: Porting an engineRe: Don Don 12/27/01 06:54PM
  Re: Porting an engineRe: Crisis Crisis 12/27/01 08:14PM
  Re: Porting an engineRe: DaveI DaveI 12/28/01 01:22AM
  Re: Porting an engineRe: chuck russo (VA) chuck russo (VA) 12/28/01 02:41AM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account