MB5 doesnt sputter with new plug??

Timmo /
This single post is part of a larger thread. Start from the top or view this post in context.

Well, despite that fact that it runs, im getting a new cylinder anyway, cuz 60 psi is bad. However, today i put ANOther new plug in ( same type as last weeek) and i got the same results. The mb5 runs just fine. Replacing the plug every 2 days seems to fix the problem, but obviously thats not the solution. WTF?? am i burning up the plug or something?? I'm using a Denso W24FS-U. The manual says to use a BR9HS for high speed, or a BR8HS for low speed. Someone got an idea?

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  MB5 doesnt sputter with new plug??Topic by: Timmo Timmo 12/10/01 06:46PM
  Re: MB5 doesnt sputter with new plug??Re: casey casey 12/10/01 07:00PM
  Re: MB5 doesnt sputter with new plug??Re: Timmo Timmo 12/10/01 08:40PM
  Re: MB5 doesnt sputter with new plug??Re: Duck Duck 12/10/01 09:17PM
  Re: MB5 doesnt sputter with new plug??Re: mike hartel mike hartel 12/14/01 11:38AM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account