RE: Need general Info

ivo /
This single post is part of a larger thread. Start from the top or view this post in context.

<HTML>if it doesn't turn over, it could be a few things.

If the bike has been standing still a long time, without a carb on it, or with the carb in an open position, the piston could be rusted onto the cylinder.

The previous owner could have had a .... what's it called in english .... well, the piston could be jammed into the cylinder because of a broken pistonspring.

You could have a broken gearbox (if it has gears, I don't know)

The crankshaft could be broken (I mean in-2-pieces-broken)

Anyway, you should disassemble the cylinderhead, cylinder and piston and (maybe) split the engine. When you close it up again, be sure to use new gaskets.</HTML>

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  Need general InfoTopic by: Gary Gary 05/29/00 12:55AM
  RE: Need general InfoRe: dave dave 05/30/00 08:25AM
  RE: Need general InfoRe: ivo ivo 05/30/00 08:15PM
  RE: Need general InfoRe: leo leo 06/28/00 01:04PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account