Hi all. I just want to let those of you know that in my case the problem is the Amal carb jetting. I was running way too lean (luckly I had used 22oz. of MC-2 to 5gal.) with the main jet that came with my carb. It had a #45 (the smallest) jet and that is why I was having the cutting out problem. I would imagine that orthers are also running lean if they have the #45 jet too. I have dealt with Mopedsonline.com exclusively and have found them to be wonderful to deal with. They offer great help and support and I also appriciated the speed in which they replied to my questions.They can get any of the Amal jets if any of you would care to experiment with your jetting. I have not received my jets yet (they were sent out today) so I can't say which one will be correct. I just got the first 2 sizes over the stock #45, but I think that is probably the range I need to be in. I will let you all know what I find in a few days. Ride Safe! Butch