motron cylinder head

Jim Mc /
This single post is part of a larger thread. Start from the top or view this post in context.

I purchased a used motron moped around late 70's or early 80's.The speedomotor said 400 miles and it ran well at the time.Iam experiencing hard starting at present but when it starts it runs well.I replaced the spark plug and increased the idle because it appeared to load up on fuel and stall when going down hill coasting at idle.I pulled the head to examine it and there was no gasket.Is there supposed to be a gasket between the block and the cylinder head?If somone is familiar with this engine please comment. Thanks Jim

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  motron cylinder headTopic by: Jim Mc Jim Mc 07/24/01 09:18PM
  Re: motron cylinder headRe: Ron Brown Ron Brown 07/25/01 10:24AM
  Re: motron cylinder headRe: Ron Brown Ron Brown 07/25/01 10:27AM
  Re: motron cylinder headRe: JimMc JimMc 07/25/01 12:45PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account