Puch cylinders (high torque series)
From MopedWiki
|
[edit]
Sorting Table
The information in this sorting table was taken from the Puch manual.
| Number | Cylinder Diameter | Piston Diameter |
|---|---|---|
| 11 | 1.4960-1.4963 in (38.000-38.005 mm) | 1.4944-1.4946 in (37.965-39.965 mm) |
| 22 | 1.4963-1.4965 in (38.005-38.010 mm) | 1.4946-1.4949 in (39.965-39.970 mm) |
| 33 | 1.4965-1.4968 in (38.010-38.015 mm) | 1.4949-1.4951 in (37.970-39.978 mm) |
[edit]
Number 11
| This section is a stub. |
| You can help the Moped Wiki by expanding it. |
[edit]
Number 22
transfers/exhaust port |
transfers |
number 22 |
intake |
intake |
transfers (closed) |
transfers/intake port |
[edit]
Number 33
| This section is a stub. |
| You can help the Moped Wiki by expanding it. |
| Puch Information | |
|---|---|
| Puch Engine Variations | E50 • ZA50 • Korado • E50 (kickstart) • Magnum X • Engine differences (photos) |
| Puch Parts | Aluminum cylinders • High torque cylinders • Bing • Dellorto |
| Puch Performance | Kit summary • Speed/setup table • Exhausts • E50 crankshafts • Ignition system summary |
Categories: Stubs | Puch | Puch Parts | Parts