Results 1–30 of 1073
never ride my bike on fridays since i dont have parking at the university gym. otherwise 4 miles each way, everyday!
gotta love socal weather.
Forum: General Moped Discussion
Forum: General Moped Discussion
Will campeona del mundo . Wrote:
-------------------------------------------------------
> Erik Fowler Wrote:
> --------------------------------------------------
> -----
> > Proma, or a Proma, or maybe even a Proma. But
> if
> > all else fails get a Proma.
>
>
> proma is a good option too.
lets not forget about the underrated, slept on, proma.
Forum: Moped Performance
Forum: Moped Performance
i use the decomp to kill cause i dont have the kill switch hooked up. semirelated..
Forum: Moped Performance
Forum: Moped Performance
i had an inline paper filter and was running a NOS tank and i was getting clogs in the carb. it would run, start to go bad, id clean the carb, itd run for a day or so.. and the clogged carb again.
i had to really thoroughly flush the tank, compressed air, soapy water, gas rinse and then finally its not clogging.
but now the pollen in the air is clogging it after a week+ of running. stock
Forum: Moped Performance
Forum: Moped Performance
my first and current moped was/is a pa50ii honda hobbit i got for $300. i think i got lucky cause all i had to do was clean the carb and new tank and boom.. 32mph.
now it has a stocko shocko 60cc kit, upjetted to an 85, mlm pipe with TJT variator. now it hits 45+mph. oh yeah.. new tires.
if its the pa50ii id go for it.
Forum: General Moped Discussion
Forum: General Moped Discussion
tired of all this pollen clogging up my stock carb.
sell me an MLM vm18 intake for da hobbitz please. thanks!
edit: updated for hobbits.
Forum: Buy + Sell
Forum: Buy + Sell
yes. so either id like to buy the plastic (brown?) float that comes on a pa50i or the little wire hanger guy (can this be put onto a float with the "crown"?
ugh.. this probably would be better with pics.
or should i just say fuck it and buy an MLM vm18 intake..
Forum: Buy + Sell
Forum: Buy + Sell
so.. i bought a float needle off ebay.. but i need that little clip thing so that it hooks up to the float.
please halp. i think there also maybe a float that doesnt use the clip thingy that the float needle slides into? im not sure.
but holla either way.
Forum: Buy + Sell
Forum: Buy + Sell
my air screw is set at 1.5 turns out.
the throttle screw thing is set in just enough to keep it from stalling out.
Forum: Moped Performance
Forum: Moped Performance
i think if you use the stock intake, you can bolt the av7 intake to the end and mount something maybe?
Forum: Moped Performance
Forum: Moped Performance
uhh.. just buy the moped factory weights. they ran fine on my 50cc.. more acceleration and same-ish top end.
better to not tear up your ramp plate since the lighter weights are plastic.
or fuck it. pm me your address and ill send you all my old weights.
Forum: Moped Repair
Forum: Moped Repair
i had a motorcycle cop stop me on my ped. i was going close to 40 in a 25 but he was coming from the opposite direction. he was swerving back and forth across the road to stop me.
"this thing registered? (looks at plate)"
"yup"
"lights work?"
"yup" (i have 6 volt setup and its day time and im idling so.. the lights are probably poor at best)
Forum: General Moped Discussion
Forum: General Moped Discussion
kevin struthers Wrote:
-------------------------------------------------------
> http://mopedecals.bigcartel.com/product/honda-hobb
> it-decal
thats just a image file of the logo. i think thats a bigger rip off.
Forum: Buy + Sell
Forum: Buy + Sell
less oil = cooler temps eh? cause less oil = more gas and more gas/air = richer?
or.. what
Forum: Moped Performance
Forum: Moped Performance
you were able to get the sealed beam bulb to work with the puch headlight housing?
Forum: Moped Performance
Forum: Moped Performance
maybe headlight a tad lower? i dont know if the fork ears position is adjustable.
Forum: General Moped Discussion
Forum: General Moped Discussion
yeah i got the MLM peoples cause i was afraid of the loudness level of the proma..
but from what i gather the proma probably has more power as a singular bolt on. but im still happy with the MLM pipe.
Forum: Moped Performance
Forum: Moped Performance
to meet DOT standards, the new helmets have to be quite large.. so theyre gonna have a different look than the old ones.
if you're into looking like the great gazoo.
which i am.. since we're on mopeds.
Forum: General Moped Discussion
Forum: General Moped Discussion
uhh.. word on the street is that this is back in stock. but seems like shot up in price by.. 400%
Forum: Buy + Sell
Forum: Buy + Sell