Re: Reeds and general mods for a Honda NC50 Expres
You get 30 out of it! That’s what I’m aiming for .
I’ll let you know how I get on for sure. I reckon I’m going to screw it up even more but I’m going to give it a go….I know, have faith.
A big thanks to Tate from here who I pestered for information with regards to the reeds. He’s pointed me in the right direction.
"http://www.treatland.tv/honda-hobbit-camino-boyesen-power-reed-p/boyesen-honda-reeds-stock.htm":url
Boyesen were trying to charge me $50 for shipping to the UK!!! I know we’re on the other side of the pond but that was a bit steep. Treatlands $3.19 shipping cost was better. Fantastic site Treatland, good to know. I also cracked up laughing at that front page cartoon.
So……if the reeds fit, and the exhaust, and the air filter, all I need to do now is up jet. Anybody got any advice? I don’t think there are any larger jets out there that will fit. Think I will have to drill but I wouldn’t mind doing it on a spare jet. The only thing I can find are these (the jets I mean, not the massive jugs!)
"http://cgi.ebay.com/ebaymotors/HONDA-NC50-KEYSTER-CARB-KIT-1977-1981_W0QQcmdZViewItemQQhashZitem3356557c8cQQitemZ220491775116QQptZMotorcyclesQ5fPartsQ5fAccessories":url
But I just want the jet, bit much just for just that.
Any help with regards to the jet would be appreciated. I don’t even know if I’m talking sense with regards to the jet thing.
Cheers
I’ll let you know how I get on for sure. I reckon I’m going to screw it up even more but I’m going to give it a go….I know, have faith.
A big thanks to Tate from here who I pestered for information with regards to the reeds. He’s pointed me in the right direction.
"http://www.treatland.tv/honda-hobbit-camino-boyesen-power-reed-p/boyesen-honda-reeds-stock.htm":url
Boyesen were trying to charge me $50 for shipping to the UK!!! I know we’re on the other side of the pond but that was a bit steep. Treatlands $3.19 shipping cost was better. Fantastic site Treatland, good to know. I also cracked up laughing at that front page cartoon.
So……if the reeds fit, and the exhaust, and the air filter, all I need to do now is up jet. Anybody got any advice? I don’t think there are any larger jets out there that will fit. Think I will have to drill but I wouldn’t mind doing it on a spare jet. The only thing I can find are these (the jets I mean, not the massive jugs!)
"http://cgi.ebay.com/ebaymotors/HONDA-NC50-KEYSTER-CARB-KIT-1977-1981_W0QQcmdZViewItemQQhashZitem3356557c8cQQitemZ220491775116QQptZMotorcyclesQ5fPartsQ5fAccessories":url
But I just want the jet, bit much just for just that.
Any help with regards to the jet would be appreciated. I don’t even know if I’m talking sense with regards to the jet thing.
Cheers
Sorry, you must log in before posting to this forum.