Dies when accelerating, checked for a vacume leak.
1980 Honda Express NC50
K&N style air filter, 15mm Dellorto SHA replica carb with a 74 jet, pocketbike exhaust
My bike starts fine. I start the bike with the choke on. And let is warm up. I take the choke off when the bike is warm and the bike idles ok. When I accelerate I ride for about 30 seconds then the bike dies out. But when I choke the bike or put my hand over the air filter, the bike starts to idle ok again. Then, when i release the choke, and try to accelerate, the bike dies out again. This happens over and over.
I thought it was a a vacuum or air leak. I used the wiki on vacuum leaks and checked every connecting space. I even made new gaskets.
Still I'm having the same issue. Any ideas?
K&N style air filter, 15mm Dellorto SHA replica carb with a 74 jet, pocketbike exhaust
My bike starts fine. I start the bike with the choke on. And let is warm up. I take the choke off when the bike is warm and the bike idles ok. When I accelerate I ride for about 30 seconds then the bike dies out. But when I choke the bike or put my hand over the air filter, the bike starts to idle ok again. Then, when i release the choke, and try to accelerate, the bike dies out again. This happens over and over.
I thought it was a a vacuum or air leak. I used the wiki on vacuum leaks and checked every connecting space. I even made new gaskets.
Still I'm having the same issue. Any ideas?
| Subject | Written By | Posted |
|---|---|---|
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
Sorry, you must log in before posting to this forum.