Puch CDI: Lights Not Working?
Hey everyone,
This is probably a stupid question but I can't seem to get my headlight and taillight to work. Here's my setup:
CDI E50
LED taillight
Headlight
Followed this guide:
http://www.mopedarmy.com/wiki/Puch_CDI
The Magnum starts right up and I have lots of spark, but the lights don't work . . .
I ran the wires from the headlight and taillight to the red wire from the regulator, and connected the yellow wire from the regulator to the yellow wire from the stator.
Regulator is bolted onto the Magnum frame and grounded.
Any ideas?
This is probably a stupid question but I can't seem to get my headlight and taillight to work. Here's my setup:
CDI E50
LED taillight
Headlight
Followed this guide:
http://www.mopedarmy.com/wiki/Puch_CDI
The Magnum starts right up and I have lots of spark, but the lights don't work . . .
I ran the wires from the headlight and taillight to the red wire from the regulator, and connected the yellow wire from the regulator to the yellow wire from the stator.
Regulator is bolted onto the Magnum frame and grounded.
Any ideas?
| Subject | Written By | Posted |
|---|---|---|
Puch CDI: Lights Not Working?
|
||
 
Re: Puch CDI: Lights Not Working?
|
||
Re: Puch CDI: Lights Not Working?
|
Sorry, you must log in before posting to this forum.