Re: couple of porting questions =P

• Author: Shane (71.174.85.---)
• Verified User: killadude
• Date Posted: 05-12-08 06:19

thanks for that reply, definately cleared that bit up. http://www.mopedarmy.com/wiki/Motobecane_porting

there be the brief guide i read. should have linked to it on first post

it also says widen the transfer ports up a bit. so lower, and widen the intake, raise exhaust (the same amount that you raised intake), and widen transfer ports. ill tell you now i have no idea what a transfer port is =P

how could one lower the intake on a moby anyway? the intake is simply a thin tube that comes out and snugs up to the carb.

unless these ports arent external? if so im totally looking at it wrong. in fact i must be? cause you wouldnt be able to get the exhaust on if you messed with its mounts…...... unlesss

heheh its referring to the end of that “tunnel” where it meets the piston. but if thats so i THINK the carb intake is pretty direct…

and i understand what it meant by removing the material in the piston now. it means to make the “window” more like a door, as in it no longer has a “bottom” in that area.

haha sigh can anyone clarify a little more?

24 mph just isnt cutting it for me. and the acceleration is nothing to brag about… thankkssss for putting up with my noobishness =P