Forum List  |  New Topic  |  Go to Top  |  Go to Topic  |  Flat View  |  Search   « Previous Post  |  Next Post »

Re: motobecane/ sachs/ jawa porting and milling??

  • Author: Jerry (66.201.142.---)
  • Verified User: stanyon
  • Date Posted: 03-22-08 17:20

Well this is the easiest way I have found to mill heads, Take a piece of round stock steel 6 inches long, thread it about two inches using the same die size as that used on the tap for the spark plug hole. Thread it into the head and lock it down on the inside and outside with a nut so you are squeezing the head between them. Now place the protruding round stock from the top of the head into a lathe chuck and proceed in removing what you dont want from the head. Not hard to do. jerry
Reply To This Message  
 Topics Author  Date
 
 motobecane/ sachs/ jawa porting and milling??  new
robert 03-22-08 08:19
 Re: motobecane/ sachs/ jawa porting and milling??  new
flagrant 03-22-08 12:13
 Re: motobecane/ sachs/ jawa porting and milling??  new
Graham 03-22-08 15:55
 Re: motobecane/ sachs/ jawa porting and milling??  new
Jerry 03-22-08 17:20
 Re: motobecane/ sachs/ jawa porting and milling??  new
amory 03-22-08 20:03
 Re: motobecane/ sachs/ jawa porting and milling??  new
robert 03-23-08 08:31
 Re: motobecane/ sachs/ jawa porting and milling??  new
WariSesi 03-22-08 20:09
 Re: motobecane/ sachs/ jawa porting and milling??  new
mbartell 03-23-08 12:19
 Re: motobecane/ sachs/ jawa porting and milling??  new
Terry 05-17-08 23:43
 Re: motobecane/ sachs/ jawa porting and milling??  new
jack 05-17-08 23:58
 Re: motobecane/ sachs/ jawa porting and milling??  new
Graham 03-23-08 16:12


You must be logged in to reply to this post.

Creating an account takes only a moment, and not only lets you post, but automatically puts you in the Moped Owners Directory. This the best way to get to know others in the moped community.
Username or
Email Address:
Password:
Remember Me:
 
Do you need to create an account?
Forgot your password? We'll reset it.



Red Arrow   Swarming and Destroying since 1997   |   Contact Us   |   Back to the top