Re: Moped Nitrous

• Author: pimped_peds (---.nas7.des-moines1.ia.us.da.qwest.net)
• Verified User: moped_lover69
• Date Posted: 10-23-05 17:59

1st step. i made a bracket for the N2O trigger so it could be mounted up by the handle bars.(this way i didnt have to reach all the way down by the motor to pull the trigger, this is also safe so the n2o canisters dont risk over heating)

2nd step. i ran the N2O hose down from the trigger to the air box. i drilled a hole in the hose that conects the air box to the carb. i screwed in the injecter jet to there. (i also made a direct port injector on the intake manifold, it allows it to shoot into the cylinder easier)

3rd step. i tested the kit and it worked.

For those willing to spend $45 and about 10 to 15 minutes of there time this is a good way to get the speed you want, without blowing your motor