Forum List  |  New Topic  |  Go to Top  |  Go to Topic  |  Flat View  |  Search   Next Post »

Minarelli V1 / Polini / starter clutch

  • Author: arne (---.hsd1.ca.comcast.net)
  • Verified User: arne
  • Date Posted: 11-04-09 00:13

hi-

just upgraded my lazer minarelli v1 to a 21mm dellorto and a polini kit. it almost started (first sputters), but then as hard as i press the starter clutch it just slips.

is it common for this clutch to slip, would it need replacing?

or is the compression simply too high (using the standard 50cc head, measured squish, 1.2mm all good).

some snapshots from the workshop for good measure:
Reply To This Message  
 Topics Author  Date
 
 Minarelli V1 / Polini / starter clutch  
arne 11-04-09 00:13
 Re: Minarelli V1 / Polini / starter clutch  new
Mike Thomas 11-04-09 01:07
 Re: Minarelli V1 / Polini / starter clutch  new
Noah K 11-04-09 09:56
 Re: Minarelli V1 / Polini / starter clutch  new
LarryBones 11-04-09 17:08
 Re: Minarelli V1 / Polini / starter clutch  new
arne 11-05-09 12:06


You must be logged in to reply to this post.

Creating an account takes only a moment, and not only lets you post, but automatically puts you in the Moped Owners Directory. This the best way to get to know others in the moped community.
Username or
Email Address:
Password:
Remember Me:
 
Do you need to create an account?
Forgot your password? We'll reset it.




Red Arrow   Swarming and Destroying since 1997   |   Contact Us   |   Back to the top