Forum List  |  New Topic  |  Go to Top  |  Go to Topic  |  Flat View  |  Search   Next Post »

batavus still no spark

  • Author: jon (---.lightspeed.wlfrct.sbcglobal.net)
  • Verified User: caotic
  • Date Posted: 11-05-09 23:20

HELP! i am going nuts, i have a batavus grand prix, i cannot get any spark. i cleaned/filed/adjusted points. nothing. changed plug, plug wire, plug runs in other engine. wire ohms out to near no resistance, i have searched all online and cannot find the correct wiring diagram. i have a green/yellow, not green black that has a ring terminal, which looks like it should be the ground. a black wire comes with it from the flywheel area to the coil and split to the top distribution block. on a multimeter everything shows proper continuity, if i spin the engine over the meter will show – at most points, at one time i hit 6 volts but that was it. mostly its around .001-.017. i am baffled. sure its been years since i have dealt with this stuff. i straight wired the positive out of the flywheel area to the coil with the ground. still nothing.

condensor? bad points? i am gonna have to pull the flywheel i think. i bought this thing for $10.00 thought easy fix. points are set to .016 and plug gap to .020 by all the batavus manuals i read online.

thanks for help
Reply To This Message  
 Topics Author  Date
 
 batavus still no spark  
jon 11-05-09 23:20
 Re: batavus still no spark  new
Tropibats 11-06-09 18:40
 Re: batavus still no spark  new
leo 11-06-09 21:32


You must be logged in to reply to this post.

Creating an account takes only a moment, and not only lets you post, but automatically puts you in the Moped Owners Directory. This the best way to get to know others in the moped community.
Username or
Email Address:
Password:
Remember Me:
 
Do you need to create an account?
Forgot your password? We'll reset it.




Red Arrow   Swarming and Destroying since 1997   |   Contact Us   |   Back to the top