Forum List  |  New Topic  |  Go to Top  |  Go to Topic  |  Flat View  |  Search   « Previous Post  |  Next Post »

Re: Bringing My Gila Back to life

  • Author: elliot (---.hsd1.ca.comcast.net)
  • elliot
  • Date Posted: 05-08-08 22:00

it will work again, my polini has been seized twice once by me I actually got it seized for hella cheap.

Make sure the pins that keep the rings in place are still there, one managed to shimmy out on jimmis gilla on the ride home and nared up his piston pretty good.

I’m gonna stick with a PHBG that had a spot in the throttle range that was too lean, but gave good plug readings cuz it wasn’t ridden in that spot during plug chops. yatta yatta yatta.

But anywho, good opportunity to widen those transfers and mabey do some port work eh.
Reply To This Message  
 Topics Author  Date
 
 Bringing My Gila Back to life  new
Tom 05-08-08 21:18
 Re: Bringing My Gila Back to life  new
chicagobullz 05-08-08 21:50
 Re: Bringing My Gila Back to life  new
elliot 05-08-08 22:00
 Re: Bringing My Gila Back to life  new
Brennan O. 05-08-08 22:25
 Re: Bringing My Gila Back to life  new
andrewhed 05-09-08 00:20
 Re: Bringing My Gila Back to life  new
ZackcK 05-09-08 01:39
 Re: Bringing My Gila Back to life  new
Tom 05-09-08 02:38


You must be logged in to reply to this post.

Creating an account takes only a moment, and not only lets you post, but automatically puts you in the Moped Owners Directory. This the best way to get to know others in the moped community.
Username or
Email Address:
Password:
Remember Me:
 
Do you need to create an account?
Forgot your password? We'll reset it.




Red Arrow   Swarming and Destroying since 1997   |   Contact Us   |   Back to the top