Forum List  |  New Topic  |  Go to Top  |  Go to Topic  |  Flat View  |  Search   « Previous Post  |  Next Post »

Re: Puch Clutch

If you are talking about the retaining nut holding on first speed gear and “roller pack”...
use a 1/4 inch socket (usually 10mmm) put it between the case and the 18tooth sprocket (stops the gear from spinning freely) and boom you are ready to remove the left hand threaded nut.

If you are talking about the actual clutches themselves…I just use a flywheel holder to stop the clutch shaft from moving and remove the clutch retainer nut.

The attached image should help.
Reply To This Message  
 Topics Author  Date
 
 Puch Clutch  new
tom 05-08-08 14:47
 Re: Puch Clutch  new
tom 05-08-08 14:48
 Re: Puch Clutch  new
SidD 05-08-08 15:34
 Re: Puch Clutch  new
tom 05-08-08 16:52
 Re: Puch Clutch  new
SidD 05-08-08 17:47


You must be logged in to reply to this post.

Creating an account takes only a moment, and not only lets you post, but automatically puts you in the Moped Owners Directory. This the best way to get to know others in the moped community.
Username or
Email Address:
Password:
Remember Me:
 
Do you need to create an account?
Forgot your password? We'll reset it.



Red Arrow   Swarming and Destroying since 1997   |   Contact Us   |   Back to the top