Re: NC50 Express Starts Fine, doesn't Go
- Author: bzenk (---.pnb.org)
- Verified User: bzenk
- Date Posted: 05-06-08 18:17
Be sure that there is a %100 seal on the exhaust pipe to the jug. Do not over tighten the bolts on the jug because they can break off and are a pain to replace. You can get these from Honda. If you have an air leak the plugs will get caked with carbon. One of the design flaws with the exhaust is the hole on the top tha bolts to the engine is not in the correct position and when you tighten down the exhaust it will stress out the pipe and bust the pipe at the jug. Check the gap on your plug and make sure it is set to spec.
|