Re: pa50 not starting
- Author: silverfox (---.proxy.aol.com)
silverfox - Date Posted: 04-23-08 02:02
The run/stop switch on the right handlebar is in the run position, right?
And the ignition switch is on.
Pull htat new cap off and see if you get a spark from the wire to the engine. Try holding is so the gap between the end of the wire and the engine is about 1/16” You might have to make up some kind of a jury rigged thing to hold the wire in place while you crank.
Does the headlight light up when you are cranking it?
|
