FS: Used MK80, 21 PHBG, nice E50, Gila, etc.

• Author: chicagobullz_investor (---.127.33.65.cfl.res.rr.com)
• Verified User: puchtothemaxi
• Date Posted: 05-06-08 23:22

Alright, cleaning up my current parts cache to support a reedvalve habit and some tattoos and stuff. I have detailed pics included for the parts that need detail; trying to beat up on my stuff as much as I can, I’d rather you be surprised that it’s nicer than you thought when you get it, than pissed that it’s crappier. P.S. Everything in pics is included.

80 Big Port Metra + 22mm Header Intake – $90 shipped



This kit has seen a seizure. Sleeve and piston have serious
heat marks from running hot. However, there really isn’t gouging to speak of. Cylinder walls are pretty smooth; there is one spot where it feels like some material came off the rings and stuck to the wall. I was going to do a hone, and throw a new piston in it. If it worries you, you could do a +1 or +2 overbore as well. Here is a source for a new stock size MK80 piston, orrrr read on to the next item.
Detail pic 1
Detail pic 2
Detail pic 3
Detail pic 4

Brand new Gilardoni 80 aka 74 piston – $40 shipped



This is a brand new stock sized slug for the Gila. I bought
it as a potential Metra replacement, being the same 47mm.
The rings match up fine in the Metra, the difference between this and a Metra piston is the boost ports on the Gila slug. You
can be brave and try it, or just buy this for your wounded Gila.

Brand new 21 PHBG Race Edition with choke – $110 shipped



As stated. Carb was 130 + shipping, the push choke is an 8 dollar bonus, all in all, a great deal.

E50 cases welded for big port 80 Metra – $30 shipped



These cases have been ported, and extra material added on
the sides for the big port MK80. Pretty clean work.

E50 bottom end, ran fine, then pulled – $130 shipped



This E50 bottom end is pretty nice. If you want a top end,
I have a stock #3 setup I can throw on it, no prob. I just figured I’d sell it as a bottom end only, as most people are looking
for E50s to throw kits on.

Pinto 2 tank, surface rust inside, w/ petcock – $35 shipped



Surface rust inside, nothing has rotted through, would probably
clean up real nice (where did I put my Kreem?), outside is like a 6 or 7/10, the decal on the side not pictured is nicer than the one shown. Comes with the measuring cup gas cap.
Detail pic

Brand new UNI filter for PHBG – $14 shipped



Vintage gold metalflake helmet, small head – $40 shipped



This thing is in pretty decent shape for its age. This will fit
good if you have a smallish head. Could use a new liner,
there was a thread about this recently, throw some fabric
and some 3M tape in there. Old school, aka not DOT approved.
Detail pic 1
Detail pic 2

Here’s your fine print. I ship USPS, unless you specify otherwise. PayPal only; payment address is thebrownies4@verizon.net / As always, FL and PA folks receive a 10% discount. No trade offers,
unless you’re talking Michael Jordan memorabilia.