Forum List  |  New Topic  |  Go to Top  |  Go to Topic  |  Flat View  |  Search   Next Post »

what to use to flush a case? chris MWH?

ok well i had to do some grinding on the inside of my 2 speed puch motor last night, i taped off the crank and then put some hot glue on top of the tape to make a pretty good seal. after i was done griding i blew the case out as best as i could(i dont ahve a air compressor) and then i noticed that there were still a few specs of aluminum shavings in my case. my uncle sugessted that we fill the crank area up with deisil fuel, shake it around a few times and then pour it into a bucked with a paper towel on top and see what comes out, we flushed it 4 times, and all 4 times aluminum pieces came out, the last time only a few small pieces came out.

i plan on flushing it 2 more times, but is using deisil fuel a good idea? he said use this over gas cuz deisil is less refined and contains some oil in it.

thanks in advance...
Reply To This Message  
 Topics Author  Date
 
 what to use to flush a case? chris MWH?  
chuck russo va 03-03-03 14:58
 Re: what to use to flush a case? chris MWH?  new
Chris MWH 03-03-03 15:09
 Re: what to use to flush a case? chris MWH?  new
chuck russo va 03-03-03 16:25
 Re: what to use to flush a case? chris MWH?  new
firebeermayhem 03-03-03 18:08


You must be logged in to reply to this post.

Creating an account takes only a moment, and not only lets you post, but automatically puts you in the Moped Owners Directory. This the best way to get to know others in the moped community.
Username or
Email Address:
Password:
Remember Me:
 
Do you need to create an account?
Forgot your password? We'll reset it.




Red Arrow   Swarming and Destroying since 1997   |   Contact Us   |   Back to the top